The overall layout of CNC bending machine equipment is three and some: bracket, work table and clamping plate. When in use, the coil is energized by a wire, and after the power is applied, the pressure plate is attracted, and then the clamping between the pressure plate and the base is completed. After knowing how to use it, you will feel that the CNC bending machine is very simple. Not much to say, let us know immediately how to use the CNC bending machine used by Kunshan sheet metal processing manufacturers:

  In the first step, first turn on the power, turn on the switch on the control panel, and then start the oil pump. Do not perform any operation when you hear the sound of the oil pump changing.

  The second step is stroke adjustment. It is necessary to pay attention to it when using it. Always pass the test before bending. It is necessary to have a plate-thick gap when the upper mold moves down to the bottom, otherwise the mold machine will be damaged. The adjustment of the stroke includes electric speed adjustment.

  The third step is to select the bending notches. Usually, the notches with 8 times the thickness of the plate should be selected. If you need to bend a 4mm sheet, you need to choose a slot of about 32.

  The fourth step is to adjust the back gauge by electric speed adjustment and manual fine adjustment.

  Fifth step, press the foot switch to bend at the beginning. The CNC bending machine is not the same as the CNC shearing machine. It can be released at any time. When the foot is released, it stops and then continues to descend. The CNC bending machine bends directly, without splicing, slotting, or welding rods. Its angled surface is beautiful and does not leak water. It transforms manual welding into fully automatic machine operation, which improves quality and labor efficiency. Reduced labor costs and greatly shortened the production cycle of goods.

Sheet metal processing